DESKRIPSI TRAINING VARIABLE SPEED DRIVE

Pumps, fans, blowers and compressors consume as much as 65% of this total. A large proportion of these applications are powered by fixed or constant speed drivers whose load demands often fluctuate. This poor match of speed and demand results in considerable wasted energy and significantly increased wear of system components. Variable speed drive technology is a cost effective method to match driver speed to load demands and is an excellent opportunity to reduce operating costs and improve overall efficiencies in your application.

This course gives you a fundamental understanding of the installation, operation and troubleshooting of variable speed drives. You will learn the basic setup of parameters, control wiring and safety precautions in installing a VSD. The various drive features such as operating modes, braking types, automatic restart and many others will be discussed in detail. You will learn the four basic requirements for a VSD to function properly with emphasis on typical controller faults, their causes and how they can be repaired.

The concluding section of the course gives you the fundamental tools in troubleshooting VSD confidently and effectively. Even though the focus of the course is on the direct application of this technology, you will also gain a thorough understanding of the problems that can be introduced by VSD such as harmonics, electrostatic discharge and EMC/EMI problems.

TUJUAN TRAINING INDUSTRIAL VSD

Setelah mengikuti pelatihan, diharapkan peserta mampu:

Demonstrate a sound understanding of how AC Variable Speed Drives (VSD’s) work
Install VSDs properly
Select the right VSD for a given application
Troubleshoot VSDs competently
Competently explain how flux-vector control works for drive applications understand squirrel cage induction motors
Identify the protection and control system requirements for VSD’s
Interface VSD’s with PLCs
Understand the causes of motor burnout
Deal effectively with VSD harmonics and
EMC/EMI problems

MATERI TRAINING VARIABLE SPEED DRIVE

1. Introduction To Variable Speed Drives

The Need for Variable Speed Drives
Fundamental Principles of Speed Control
Efficiency, Torque, Inertia,
Horsepower/Power Factor
Torque-Speed Curves
How the motor produces Torque
Types of Variable Speed Drives
2. 3-Phase Ac Induction Motors

Basic Construction and Physical Configuration
Principles of Operation and Performance
Equivalent Circuit and Fundamental Equations
Starting, Acceleration, Running and Stopping
Power, Torque and Thermal Rating
3. Power Electronic Converters

Definitions and Basic Principles
Power Diodes and Thyristors
Principles of Communication
Power Electronic Rectifiers
Power Electronic Inverters
Gate Commutated Converters
Gate Controlled Devices 9 – 11 November 2021 GTO, FCT, GTR, FET, IGBT
4. Electromagnetic Compatibility (EMC)

Sources of Electromagnetic Interference
Harmonics on the Power Supply side of AC Converters
The Effect of Harmonic Distortion on other connected Equipment
Methods of reducing the effect of Supply side Harmonics
Electric Motor Protection
Thermal Overload Protection 9 – 11 November 2021 Current Sensing
Thermal Overload Protection 9 – 11 November 2021 Direct Temperature Sensing
5. Protection Of Motors And Converters

AC Frequency Converter Protection Fault Diagnostics
Electric Motor Protection
Thermal Overload Protection 9 – 11 November 2021 Current Sensors
Thermal Overload Protection 9 – 11 November 2021 Direct Temperature
6. Control System For Ac Variable Speed Drives

The Overall Control System
Power Supply to the Control System
DC Bus Charging System
VSD Control Loops (Open-Loop, Closed- Loop)
Vector control and its applications Current Feedback in AC Variable Speed Drives
Speed Feedback from the Motor
7. The Selection Of Ac Converters For Variable Speed Drive Applications

The Basic Selection Procedure
Loadability of Converter Fed induction Motors
Operation in the Constant Power Region
The Nature of the Machine Load
Starting and Stopping VSDs (Motor Braking)
8. The Selection Of Ac Converters (Continued)

How to Calculate Acceleration Torques and Times
How to Select the correct Motor and
Converter for Pump and Fan Loads
How to Select the correct Motor and
Converter for Constant Torque Loads, such as conveyors
Summary of the Selection Procedure
9. Installation And Fault Finding Techniques

General Installation and Environmental Requirements
Power Supply Connections and Earthing
Where to install the Contactors in the Power Where to install the Contactors in the Power Circuit
Installing AC Converters into Metal Enclosures

PESERTA TRAINING VARIABLE SPEED DRIVE OFFLINE JOGJA

Training ini diperuntukkan bagi:

Staff, Supervisor, Manager ataupun level diatasnya dari Divisi SDM ataupun divisi lainnya yang membutuhkan training ini;
Praktisi atau Profesional yang ingin menambah pengetahuan mengenai Industrial VSD for Factory Automation

METODE PELATIHAN VARIABLE SPEED DRIVE KUALA LUMPUR

Metode yang diberikan Diskusi, Praktek dan Studi Kasus.

INSTRUKTUR PELATIHAN INDUSTRIAL VSD BANDUNG

Instruktur yang mengajar pelatihan ini adalah instruktur yang berkompeten di bidangnya dengan baik, datang dari kalangan akademisi maupun praktisi. Kami sangat terbuka jika Anda ingin berkomunikasi terlebih dahulu tim trainer sehingga outline materi dapat disesuaikan dengan outcome kompetensi yang diharapkan.

Jadwal Diorama Training Tahun 2025

• Januari : 16-17 Januari 2025
• Februari : 13-14 Februari 2025
• Maret : 5-6 Maret 2025
• April : 24-25 April 2025
• Mei : 21-22 Mei 2025
• Juni : 11-12 Juni 2025
• Juli : 16-17 Juli 2025
• Agustus : 20-21 Agustus 2025
• September : 17-18 September 2025
• Oktober : 8-9 Oktober 2025
• November : 12-13 November 2025
• Desember : 17-18 Desember 2025

Catatan: Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta. Peserta dapat mengajukan tanggal pelaksanaan pelatihan. Sebelum melakukan booking tiket perjalanan maupun hotel mohon untuk menghubungi marketing kami terlebih dahulu. Kesalahan pemesanan tiket terkait jadwal tanpa surat konfirmasi (Confirmation Letter) bukan merupakan tanggung jawab tim Diorama Training.

LOKASI 

REGULER TRAINING

• Yogyakarta, Hotel Fortuna Grande Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Kemang  La Codefin (6.500.000 IDR / participant)
• Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
• Surabaya, Hotel Neo Gubeng (7.500.000 IDR / participant)

ONLINE TRAINING VIA ZOOM

INVESTASI 

• Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Catatan: Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Benefit Apa Saja yang Didapatkan Peserta?

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan (By Request)
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or backpack (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2x Coffee Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

FAQ tentang Diotraining

P : Berapa minimal running pelatihan ini ?
J : Pelatihan ini akan running idealnya minimal dengan 3 peserta, tetapi bisa disesuaikan dengan kebutuhan peserta

P : Apakah bisa jika saya hanya ingin pelatihan sendiri aja / private course ?
J : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien

P : Dimana saja pelatihan biasanya di selenggarakan?
J : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia

P : Apakah bisa diselenggarakan selain di kota lain?
J : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas

P : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
J : Bisa diselenggarakan secara IHT di Perusahaan klien

P : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
J : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien.

Materi, Lokasi dan Jadwal Pelatihan Bisa Berubah Sewaktu-waktu dan disesuaikan Dengan Kondisi Peserta, dimohon untuk Melakukan Konfirmasi untuk Segala Bentuk Perubahan, agar Tidak Terjadi Miskomunikasi. Segera Daftarkan Pelatihan, Dapatkan Promo Menarik Bulan Ini.

Beberapa Klien Kami

Silabus Training ini di edit oleh Wafa Setiawan sebagai Content Writer Spesialis. Tim Diorama Training di bidang Pelatihan Konsultasi Sumbedaya Manusia dan Sertifikasi.